By Model



Android Smartphones based on MT65XX / MT67XX / MT68XX / MT8XXX

SPFT Method

Bypass boot authorization

Bypass boot authorization for supported MTK devices
How to bypass boot authorization on MTK devices

Unknown MTK devices

Unlock, IMEI Repair, FRP Remove and other service features
Manual Connection of Your Smartphone
Remove Huawei ID
Remove pattern lock, password code and other user data
Remove FRP for Huawei/Alcatel/Moto and other MTK devices:
Repair IMEI for Huawei/Alcatel/Moto and other MTK devices:
Model / Vendor / Country repair for Huawei MTK devices
Read / Write OEM info for Huawei MTK devices
Direct Unlock for Huawei/Alcatel/Moto and other MTK devices:
Calibration Manual

SOFTWARE TESTPOINT

SOFTWARE TESTPOINT for Huawei MTK devices

Yoda Method (via ADB mode)

  1. Enable USB debugging on the phone.
  2. Root the smartphone.
  3. Select "ADB Android" platform from the tab menu in the upper left side of the software.
  4. Select "Adb interface" in the ports selection tab.
  5. Perform Direct Unlock / Repair IMEI / other service operations.

PRESS HERE TO SEE FULL STEP-BY-STEP MANUAL

Generic Method

Unlock

Get Unlock Codes
Direct Unlock
Direct Unlock for ZTE Blade Q / Blade Q Mini / Blade Q Maxi / Orange Reyo
Direct Unlock for 5049W / 5049Z / REVVL / A30 Fierce

Repair

Repair IMEI
Repair IMEI for ZTE Blade Q / Blade Q Mini / Blade Q Maxi / Orange Reyo
Get bootloader code

Service

FRP Remove for Huawei smartphones


Reminder! Before servicing the phone, please make sure that:

  1. You use the latest version of Smart-Clip2 software
  2. Battery must be connected to the phone's board and fully charged. Especially while performing operations using testpoint.
  3. All the side programs, that may interfere with the phone, are closed
  4. Phone’s cable and device itself should not be disconnected or disturbed until the procedure is fully completed
  5. Phone's connection:
    • Via USB: connect phone to USB port placed on the backside of PC (motherboard's USB port)
      Do not connect or disconnect other USB cables into the PC during the actual work with the phone
    • Via COM: use recommended Prolific / FTDI drivers only
  6. Avoid using any kind of USB HUBs and long USB cables. Use the shortest-length USB cable available.
  7. Phone has stock (factory) firmware version
  8. SIM card is removed