Help by platform

Other devices

Service

Remove FRP for Lenovo smartphones
Remove FRP for Qualcomm smartphones using original loaders
Remove FRP using QCOM AUTODETECT feature

Unlock

Direct unlock for Bmobile QW130
Direct unlock for SkypePhone AMOI WP-S1 / WP-S2
Direct unlock for ZTE hotspot mobile devices
Direct unlock for BLU Dash 3.5 (D160A) / Tecno P3
Direct unlock for Kyocera C6522, C6530, E6560, E6710, E6790TM
Get unlock codes for Kyocera C6522
Universal unlocking manual for Qualcomm based device

Repair

Repair IMEI for ZTE hotspot mobile devices
Repair IMEI for BLU Dash 3.5 (D160A) / Tecno P3


Reminder! Before servicing the phone, please make sure that:

  1. You use the latest version of Smart-Clip2 software
  2. Battery must be connected to the phone's board and fully charged. Especially while performing operations using testpoint.
  3. All the side programs, that may interfere with the phone, are closed
  4. Phone’s cable and device itself should not be disconnected or disturbed until the procedure is fully completed
  5. Connect phone to USB port placed on the backside of PC (motherboard's USB port)
    Do not connect or disconnect other USB cables into the PC during the actual work with the phone
  6. Avoid using any kind of USB HUBs and long USB cables. Use the shortest-length USB cable available.
  7. Phone has stock (factory) firmware version
  8. SIM card is removed