It's mandatory to root device before Repair IMEI operation!
- Turn the rooted phone ON and wait until it fully starts up.
- Make sure that USB debugging is enabled on your device.
- Select "Android ADB" platform from the tab menu in the upper left side of the software.
- Go to "IMEI" tab.
- Connect the phone to PC with micro USB cable.
- Select "Adb interface" in the ports selection tab.
- Enter IMEI number in the "Phone IMEI" field.
- Press "Repair IMEI" button.
For U9200 ONLY: during the work with this phone, Smart-Clip2 will ask you to download a special file in *.skf format and place it into the My Documents\Smart-Clip2\addons. Find and download this particular file at boot-loader.com >> Smart-Clip2 >> Huawei >> U9200 folder. You can either download this exact file or a whole set of files (if necessary). Download Addons in *.zip format from the corresponding tab on a website.
- The message "Done" indicates that procedure was completed successfully.
- Wait for the message "Restarting phone... Done" to appear in Smart-Clip2 dialog window; only after that you can turn the phone off.
Phone will return to the original state after flashing (old IMEI number will return)
In order to fix "Software IMEI: Not found" software issue in Huawei HiSilicon-based smartphones, please perform the following steps:
- Backup NV file from a working set and restore it into the corrupted one.
- Repair phone’s original IMEI
It's mandatory to root device before starting the operation!
- Turn the rooted phone ON and wait until it fully starts up.
- Make sure that USB debugging is enabled on your device.
- Connect the phone to PC using USB cable and no more further actions should be taken with the phone while the procedure is in progress!
- Select "Android ADB" platform from the tab menu in the upper left side of the software.
- Go to "Hi-Silicon" tab.
- Select "Adb interface" in the ports selection tab.
- Press "Backup calibration data" button and save NV file on your PC.
- The message "DONE" indicates that the procedure has been completed successfully.
- Disconnect the handset.
If you check “Write firmware” field during the Backup calibration data procedure, it allows you to backup modem firmware and save it into a NV file.
Backup of a phone's NVRAM area is now stored locally on your PC.
It's mandatory to root device before starting the operation!
- Turn the rooted phone ON and wait until it fully starts up.
- Make sure that USB debugging is enabled on your device.
- Connect the phone to PC using USB cable and no more further actions should be taken with the phone while the procedure is in progress!
- Select "Android ADB" platform from the tab menu in the upper left side of the software.
- Go to "Hi-Silicon" tab.
- Select "Adb interface" in the ports selection tab.
- Press "Restore calibration data" button and select required NV file.
- The message "DONE" indicates that the procedure has been completed successfully.
- Disconnect the handset.
If you check “Write firmware” field during the Restore calibration data procedure, it allows to restore modem firmware (if a modem firmware is stored in a file).
