Help by platform

Qualcomm: Huawei Android Smartphones


FRP Remove

FRP Remove via Fastboot mode
Huawei ID / FRP Remove using Testpoint
FRP Remove feature method for the newest Huawei devices via Safe mode

ENABLE DOWNGRADE

Enable downgrade on the latest Huawei smartphones
ENABLE DOWNGRADE via Manufacture mode

Manufacture Mode

Unlock
Repair IMEI
Get Huawei bootloader unlocking password
Huawei ID remove
Repair of Wi-Fi, Bluetooth and Serial Numbers

Flash

Rescue mode entering
How to check Vendor / Country of the phone
FLASH via fastboot mode (only for reviving of bricked devices)
UPGRADE MODE flashing
Change Provider (Vendor/Country)
FACTORY MODE: phones detected as "Qualcomm HS-USB QDLoader 9008"

Unlock (ADB Mode)

Enable USB Debugging and Root
Root procedure for Huawei Y536A1 (Fusion 3) and Y550
Direct unlock via ADB mode (phone in turned on state)
Direct unlock for S7-301u, S7-302u, S7-303u, S7-312u and S7-721u
Unlock SIM BLOCK

Work with Bootloader (ADB Mode)

Unlock Huawei bootloader
Get Huawei bootloader password


Reminder! Before servicing the phone, please make sure that:

  1. You use the latest version of Smart-Clip2 software
  2. Battery must be connected to the phone's board and fully charged. Especially while performing operations using testpoint.
  3. All the side programs, that may interfere with the phone, are closed
  4. Phone’s cable and device itself should not be disconnected or disturbed until the procedure is fully completed
  5. Connect phone to USB port placed on the backside of PC (motherboard's USB port)
    Do not connect or disconnect other USB cables into the PC during the actual work with the phone
  6. Avoid using any kind of USB HUBs and long USB cables. Use the shortest-length USB cable available.
  7. Phone has stock (factory) firmware version
  8. SIM card is removed