Help by Platform


Work via USB Cable

Phones based on MT625A, MT6260, MT6261


Direct Unlock
Get Unlock Codes


Repair IMEI


Backup Manual
Flash Manual

Work via COM Port

Phones based on MT625A, MT6219, MT6223, MT6225, MT6226, MT6235, MT6236, MT6238, MT6239, MT6250, MT6251, MT6252, MT6253, MT6260, MT6261, MT6268


Direct Unlock Manual
Read Codes Manual
Read User Code Manual
EX-Series Unlock Manual


Flash Manual
Backup Manual
Description of flash files
Recommended COM port speed


Repair IMEI Manual


Phone Book Export Manual
Calibration Manual
Flex Manual
Format FFS Manual


DTR & RTS Control
Options Description
MTK Boot

Reminder! Before servicing the phone, please make sure that:

  1. You use the latest version of Smart-Clip2 software
  2. Battery charged more than 50%
  3. All the side programs, that may interfere with the phone, are closed
  4. Phone’s cable and device itself should not be disconnected or disturbed until the procedure is fully completed
  5. Phone's connection:
    • Via USB: connect phone to USB port placed on the backside of PC (motherboard's USB port)
      Do not connect or disconnect other USB cables into the PC during the actual work with the phone
    • Via COM: use recommended Prolific / FTDI drivers only
  6. Avoid using any kind of USB HUBs and long USB cables. Use the shortest-length USB cable available.
  7. Phone has stock (factory) firmware version
  8. SIM card is removed

Поточний час: 2020-08-12 04:13:14, Час генерації: 0.064128875732422